RSW Solutions

Category: P38 EAS Fault Codes

  • FR Valve Stuck Open

    —

    by

    Storey Wilson
    in

    This fault is indicating that there is a possible problem with the Front Right solenoid valve. But…Be very wary of this fault code. The most likely cause of this fault code is a leak in one of the air springs or general leak in the system. Also make sure and check for a weak compressor.…

  • FL Valve Stuck Open

    —

    by

    Storey Wilson
    in

    This fault is indicating that there is a possible problem with the Front Left solenoid valve. But…Be very wary of this fault code. The most likely cause of this fault code is a leak in one of the air springs or general leak in the system. Also make sure and check for a weak compressor. Find…

  • Cannot lower RR

    —

    by

    Storey Wilson
    in

    The EAS Computer was unable to lower the Rear Right corner of the vehicle. This could be due to an obstacle or a problem with the EAS valve block. Read and clear this fault code yourself with the EAS Unlock V4 for the P38 Range Rover.

  • Cannot lower RL

    —

    by

    Storey Wilson
    in

    The EAS Computer was unable to lower the Rear Left corner of the vehicle. This could be due to an obstacle or a problem with the EAS valve block. Read and clear this fault code yourself with the EAS Unlock V4 for the P38 Range Rover.

  • Cannot lower FR

    —

    by

    Storey Wilson
    in

    The EAS Computer was unable to lower the Front Right corner of the vehicle. This could be due to an obstacle or a problem with the EAS valve block. Read and clear this fault code yourself with the EAS Unlock V4 for the P38 Range Rover.

  • Cannot lower FL

    —

    by

    Storey Wilson
    in

    The EAS Computer was unable to lower the Front Left corner of the vehicle. This could be due to an obstacle or a problem with the EAS valve block. Read and clear this fault code yourself with the EAS Unlock V4 for the P38 Range Rover.

  • Vehicle Has Moved

    —

    by

    Storey Wilson
    in

    While the vehicle was off, the suspension height changed due to a leak in the system. Find and repair all leaks in the EAS system. Read and clear this fault code yourself with the EAS Unlock V4 for the P38 Range Rover.

  • Target Heights Incorrect

    —

    by

    Storey Wilson
    in

    When re-calibrating the EAS heights, the EAS computer has its own set of internal limits. If those internal calibration target heights are exceeded, then the EAS computer will throw this fault code. Try the re-calibration again, but this time lessen the ammount of change you are putting in the new target height values. Read and…

  • Air Supply Leak

    —

    by

    Storey Wilson
    in

    Always check and fix all air leaks before investigating this EAS Fault code. The problem may simply be an air leaks somewhere else in the system. Read and clear this fault code yourself with the EAS Unlock V4 for the P38 Range Rover.

  • Air Supply Fault

    —

    by

    Storey Wilson
    in

    Always check and fix all air leaks before investigating this EAS Fault code. The problem may simply be an air leaks somewhere else in the system. Read and clear this fault code yourself with the EAS Unlock V4 for the P38 Range Rover.