Welcome to RSW Solutions

---

Please be aware that RSW Solutions is the only legal manufacturer and reseller of RSWsolutions tools. There may be cases where counterfeit goods are sold using copyrights and trademarks which infringe on RSWsolutions intellectual property rights. Their use, installation or incorporation into other devices, equipment, systems or applications may cause accidents, breakdowns or malfunctions. Counterfeit Goods are not covered under warranty by RSW Solutions. RSW Solutions expressly disclaims any warranties related to Counterfeit Goods, express or implied, including but not limited to warranties of non-infringement, merchantability, or fitness for a particular purpose. RSW Solutions shall not be liable for any damages or losses arising out of or related to Counterfeit Goods, including without limitation incidental, consequential, special, direct or indirect damages, loss of profit, loss of data, loss of business, injury, or death, or any associated claims, demands, liabilities, penalties, obligations, causes of action, suits or proceedings, whether or not RSW Solutions had been advised of the possibility of such damages.

Thank You

R. Storey Wilson

RSW Solutions

---

---

Hi Storey

The EAS reset tool for my mkIII Range Rover arrived today exactly when
you said that it would, and the suspension was reset in 15 seconds flat.

The dealership quoted more that half the price of your tool for them to reset
my EAS and they would not be able to get me booked in for 4 days. The next time that I use the
tool it will have saved me some money.

Thanks again for designing a tool that gives me back the ability to work
on my car without having to pay to have my EAS reset every time.

Cheers
Ivan

---

---

Dear Sir

---

I Received my order , this morning at the office thank you so much for the prompt response
I happen to have random 3 Amigos on my 99 DII
promptly plug it in  .. it clear the codes , great job ..

---

---

Mr. Wilson

I purchased my first rover this august a 2004 westminster with 44000 miles. I have a third party warranty that has been nothing but a headache and fraud. I had my first EAS fault and the dealer charged me $120 to clear the fault. Living in Michigan the weather is not friendly on a car with such sensitive electronics and your product worked literally within 5 minutes, cleared my codes and reset my suspension. My code fault was ecu memory and can bus and the more I read up on this diagnostic I realized that this is more of an annoying issue that is very common in the rovers and just needs a reset. If I was a used Range Rover dealer I would give my customer your device. Fast shipping, high quality product and it WORKS!!! Range Rover Owners this device is as important as your key!

Thank You

Imran

---

---

Hi Storey - you're site was such an enormous help to my P38 issues.  I can't repay you for the goodness this site provides!
I'm saving up for one of the Buddy boxes now :)
David

Australia

---

 

---

Storey,

I received the EAS Activate for my 2005 Range Rover very quickly. I plugged it into the Rover and my EAS Faults were gone immediately. I read the fault codes and have ordered the parts to fix the system. Thank You so much for providing this tool to Rover owners. Everyone should have one of these in the car at all times.

Thanks,Tom

Charlotte NC

---

---

Hello Storey,
Thank you so much for your help recently in learning how to reset the EAS
faults. With your help, I pulled my 2000 P38 back from the dead. I replaced
the fuse box under the hood, reset the faults, and replaced o'rings on the
EAS block. It is working so great! I have never been more proud to own a
Rover. I am so glad that you are there for us, making it much easier for many Rover
owners, like me, to enjoy such a great vehicle.

Thanks again,
Paul
Lexington, SC

---

---

YOU ARE AN UNMITIGATED GENIUS!!!!!!!!!!!!!!!!!

---

Hi Storey,

 Just wanted to give you my heartfelt thanks for your wonderful site, videos, application etc.  I had a rough weekend with my EAS and managed to rectify the problem following your advice.

 It’s people like you that keep the spirit of these great vehicles alive.

 

Thanks mate!

 David

---

---

Thank you for providing this SW for free.  I had trailered my track car 6 hours away from home when my p38 developed an EAS fault.  The vehicle did not drop to the bumps, but it appeared that the suspension was disabled and I would not have been able to reconnect the heavy trailer.  I downloaded your SW at the hotel and cut up a serial cable  in the parking lot the next day.  I  was able to clear the fault which was reported as a pressure switch stuck high.  I loaded the trailer and allowed the suspension to level back out.  I then took out the EAS relay and made the 6 hour trip back home without any more problems.  As an electrical engineer, I really appreciate the work your put into this software.  I believe your SW saved the day.  Thanks!!

---

---

Hi storey,

Thanks for your genius in creating the Buddy Box v3, it arrived, I plugged it in and the EAS fault was cleared and the car raised off the bump stops.  I have had no problems since and the cars EAS seems to working better than before!  Thanks for all your help and knowledge, keeping our beloved rangies on the road.

Richard

East Sussex

England

---

---

Storey,
Just a note to say THANK YOU!!!!
I have used your EAS Unlock software with great success on my 1998 RR. After a hard fault for no apparent reason and my RR setting on the bump stops I did complete overhaul of the system, new bags and rebuild pump and valves (with parts and help from Dennis Altman of Rover Renovations). What a thrill to find someone willing to give us a way to do an end run around the dealers outrageous costs AND it actually works. With the tutorials you have created there isn't much left to the imagination.

Ken
Milton, Fl.

---

---

Thank you, Thank you! It worked like a charm

Christine

---

---

Thanks for the quick response!
Thank you again for taking the time for helping me, and for offering these products that help us keep these vehicles on the road.

JPHB

---

---

Hello Storey,
Firstly, thanks for a great piece of software and a wealth of really useful info on the video clips. They've been really useful in helping me get my 1999 RR off the bump stops. Many thanks for you efforts on helping us P38 owners keep our steeds on the road!

Kind regards,
Stephen
Cumbria, England

---

---

Storey
Last week I purchased an EAS Reset Buddy and Cable from you. I appreciate the fast shipping and the products look great.

John

---

---

I now love my Rover again. You are great, keep up the good fight...

Tim (London)

---

---

Storey
I have such a love/hate relationship with British Autos. Rovers and Jags (now) Triumphs and MG in another incarnation. They have Character and spirit -- that at times can drive us to obsession!

Thank You so much for the EAS software!
Scott

---

---

Bonjour monsieur wilson.
Je viens de recevoir mon EAS buddy box, Apres deux essais l'EAS est enfin débloque et mon P38 peut circuler.

Je vous remercie très sincèrement
Andre

---

---

Thanks for your amazing work - I am sure that many have benefited from it.
My last P38 had coil spring conversion. I looked for it because I did not want to deal with EAS issues. This time I relaxed and bought a P38 with EAS and bingo within 2 weeks I get an EAS hard fault

Thanks also for the collected media - it is an awesome primer
John

---

---

Thanks, and thanks.
The Buddy Box worked perfectly, and had me back on the road and headed for the bush five minutes after I opened the box. I really am glad I bought it, and I am way more comfortable when I am in the woods, knowing if I blow an airbag, I can just replace it and reset it, without having to make the five hour trip to Edmonton.

Thanks again,
Jon

---

---

Hi Storey,
I have just received the buddy box you sent and immediately put it to work. What an absolute " little beauty"! Just as you said, it cleared the fault within seconds.I was so pleased I had to let you know right away. I hope you do well out of it as it's something every p38 owner needs.

Thanks again.
Mike,
Perth Western Australia.

---

---

Storey,

Every Rover owner should buy your products. It worked just as promised. I wish all Rovers worked as good as your ABS Amigo.

Thank you again.

Todd

---

---

Hi Storey,
I have just received the buddy box you sent and immediately put it to work. What an absolute " little beauty"! Just as you said, it cleared the fault within seconds.I was so pleased I had to let you know right away. I hope you do well out of it as it's something every p38 owner needs.

Thanks again.
Mike,
Perth Western Australia.

---

---

Storey,
Wanted to Say Thanks
Just what I needed, worked just as you said.

Thanks,
Calvin

---

---

Hi Storey,
The new cable arrived today and worked a treat, fantastic, you are The Man!

Thanks again.
Tim

---

---

Mr Wilson,
I have been successful at last and the RR is floating on air once again; what a pleasure to be able to do it myself and put one over on the local robber-agents.

Once again thank you for your efforts in this regard. I would like to encourage you not to stop now but to continue to solve the rest of the RR diagnostics system.

If you should ever get it into your head to visit darkest Africa (it is getting darker all the time) please let me know so that we can meet up.

Best regards,
Johann
ex-Texas Aggie
(if that means anything to you)

---

---

Your are Awesome. I owe you a beer !!!

Tom from Idaho

---

---

Storey
Thanks for the fast shipment. The cable worked just as advertised. Thanks again and continued success!!

Derrick
Charlotte, NC

---

---

Storey.

I am sooooo Happy that my Rover is working again. I had replaced the air springs but I was still stuck in EAS Fault mode. Your product cured my Rover instantly.

Thanks forever, Jeff...

---

---

Hello,
I’m from Portugal and just tried your software and wanted to tell you great job. Wated to ask if you are planning to do something like this for the HEVAC system?

Thank you,
Luis

---

---

Storey
Many thanks for the almost immediate response to my query. You were of course quite right as that windows module was not installed. For the cost of an obd11 connector (£3) & use of a friends re-cycled lap top we were able to reset the eas using your software. With engine running full service was restored within about 5 minutes. Thank you very much indeed for making your software freely available!!

Kind regards,
Colin

---

---

Mr Wilson,

I just received my ABS Amigo. The ABS fault codes were immediately cleared and I was able to drive without the anoying 3 amigos lights on the dash. I am really enjoying driving my Discovery again. Keep it up....

 

Bob,

Dayton Ohio

---

---

Hi Storey,
I am so sorry it has taken me over a week to let you know how the EAS Buddy Box worked for us.
WONDERFUL and FANTASTIC!!!!!!!!!!
Such a clever little gadget we put it on the connector as you instructed. We have had no problems since and have passed on your web address to maybe 15 or 20 different Landy folks. Geoff was totally impressed by it. It now sits in the glove box. If you ever need a confirmation of how well your box works please do not hesitate in contacting us for one.

Cheers and thanks a million!
Jacquie & Geoff

---

---

Storey,
It worked like a charm....Thanks so much. I will never again under estimate a smooth ride.

James

---

---

Storey,
I cannot thank you enough for the software that you have provided me through the internet to reset my EAS computer of my 1998 Range Rover 4.6HSE. I manufactured the cable vis-à-vis your directions and downloaded the software from your site. A million thanks to you for saving me the expense of having the Land Rover dealer reset the computer.

Regards,
Edward

---

---

Storey,

All I can say is WOW... My order arrived within 3 days and you helped me every part of the way. I now feel confident in driving my Rover.

 Thank you

Martha

---

---

Storey,
G’Day,
Thankyou, Thankyou, Thankyou a thousand times over.
I had a hard fault due to a blown air bag, I replaced the airbag and have been stuck with the fault ever since. I just purchases your cable and downloaded the software. I plugged the cable into the laptop and the car and within seconds the fault was clear.
You’re a champion mate! Thanks heaps

Bryan- Brisbane Australia

---

---

Hello Storey,
Thank you for sharing your software. I can not tell you how frustrated I have been sticking the wires into the plug to pump up the springs and compressor. It took a few tries to reset even though all three apps would sync.
Finally with the calibration software and the engine running and after testing the height modes it did. Needless to say I was very happy. It is now functioning perfectly. I did make my own cable and stuck the foolish striped wires into the diagnostics plug. Sorry I just could not wait to try it!
I am ordering your cable if for nothing else than to support your efforts. again

Thank You
Bill

---

---

Great Stuff !!! Keep it up !!! Do not Stop no matter what anyone says...

Kerry in Canada

---

---

I have to thank you immensley for the computer programme and the lead i purchased from you. IT WORKED and i noww have my P38 back on the road. No thanks to thee french garages who couldn't fix it!!!! But a big thanks to you, you really are a genius and i wanted u to know how appreciated your valuable information has been.

Cary (in france)!!

---

---

You are the absolute best. I just received my EAS Buddy in the mail and it worked like a champ. My Rover is now up and running again. I also have the necessary information to get my local mechanic started fixing the air leaks.

Thanks again...

---

---

Thanks for being so nice not too many people do this thing these days. We have become a closed society that does not care about the others I appreciate your help and I hope in the future I can repay the favor. As soon as I get the request I will be sending it back to you. Again thanks and I will let you know what I find. I believe I missing some voltage to the ECU but the electrical drawing I have does not shows all the points in the connector.

Gracias
Luis

---

---

Hi...Storey.....
Storey.....I want to say and thousand thanks to you for allowing Rover owners to use this software. I will thank the Rover gods a thousand times over in your honor.....Now comes the easy part.....starting with the o-ring seals and working my way back to the valve block.....again
Storey I cannot thank you enough for this tool.

Happy Range Rover owner again
Ken
Wasilla,Alaska

---

---

HI,
JUST GOT YOUR CABLE WORKED GREAT HAD TO GET THE USB ADAPTER FROM BEST BUY SOFTWARE WORKED UNLOCKED THE FAULT. I REBUILT MY COMPRESSOR WITH A NEW UPDATED SEAL FROM A GUY OFF EBAY IN ANOTHER COUNTRY. AS OF TONIGHT EAS SYSTEM WORKING GOOD. KEEP UP THE GREAT WORK !!!

THANKS AND HAVE A GREAT DAY !!!
PETE

---

---

Storey,

I have been going over your website and I have to tell you, I am very impressed. Thank you very much for all of your time and effort. Your tools will help me and coutless other Rover owners.

Thanks,

Bert

---

---

I borrowed a buddy’s Dell latitude and it had the right hardware to get the job done. Took the Callaway out tonight and all worked well. Thanks for all your time and experience. It was much appreciated.

God bless,

---

---

Mr Storey,

I just rceived the EAS Buddy in the mail. It worked instantly. I am truely amazed. I can now drive my Range Rover with confidence.

Thank you over and over,

John

---

---

I have just arrived home and found the cable lying for me. As I write your email has just dropped in. Once again I thank you for your co-operation in this matter and wish you every success in the future.I will let you know how I get on after using the cable.

Regards,
Angus

---

---

Thanks for your kind and speedy reply. I shall eagerly await the cable and look forward to getting my P38 back on the road.

Many thanks
Mark

---

---

Storey,

You helped me when no one else would. I did not even have to purchase any of your products and you still spent time helping me with my EAS. Thank you for you generosity.

Steve

South Wales

---

---

Hi Storey,
Thanks for your prompt response on this. I recently bought a very clean one owner 2002 RR and intend to keep the EAS system, I already added Arnott GenIII springs, a MARS air bypass system, and I am rebuilding a spare valve block and compressor. Hopefully I'll never need the cable and related software, but I like to plan ahead.

I appreciate you making this item available to all RR owners.
Regards,
Dan

---

---

Mr Wilson,

You have granted my wildest dreams with your website. You software and tools have helped my through countless emergencies.

Thank you

Jerry

---

---

Hello, I want to thank you very much, your software is perfect, associated with your cable it is a real P38 owner dream. I used it on my 1996 P38 4liter and I was able to unlock it and supreme luxury to calibrate all the 4 new sensor I have fitted on my car. The explanation also is very clear and easy to understand.
THANK YOU THANK YOU....
As I have the project to go in desert in Africa it is now the only thing that could really be a problem that you cannot solve in the African way.
Again thank you and if you come one day in France in Paris there is a bottle of champagne which is waiting for you.

Best regards
Louis

---

---

Good man, my wife and her rover thank you!
scott

---

---

Hi Storey
Thanks for informing me of the new version of RR EASUNLOCK. I have fixed my car and used the software to great effect. Thanks and well done. You are a star!

Regards
Chris

---

---

Thank you Mr. Wilson for your prompt assistance
I will follow the detailed instructions and try out the program as soon as the cable arrives. If all works well this will be a great tool to have in the toolbox. In troubleshooting the EAS I will bet that I will set off the EAS hard fault code more than once. Going to the dealer is not an option (not at 100.00 a pop !!)

Again thank you very much
Jack

---

---

Hello,
I am in FRANCE, i have receive the connection cable for the P38 EAS. It is a very well done job and I try it on my locked EAS and succeed to unlock it A great thank for that.

Many thanks for you help,
Best regards

---

---

Hi Storey,
The cable arrived today, thanks. The package was in perfect condition Cable looks undamaged too. Just got to fit the new air bags and zap the error now.

Cheers
Reg

---

---

Received the cable today, which was pretty quick really. I plugged it in and tried it on Windows Vista with both EasHeights and EasUnlock. All looks good. I'll write up my experience in the discussions forum.

Thanks very much Storey, this is great.
Jeff.

---

---

I received the cable yesterday The parcel came in the ready post cushion mailer bag, all was fine Thanks very much for the cable, I am just waiting for my usb/db9 adapter to arrive and I can set about getting that damn light out.

Once again many thanks.

---

---

Hey Storey,
I just wanted to thank you for a great utility. The program and cable worked perfectly and quickly to clear my EAS fault. It hasn't come back after 200 miles, so I must have fixed it with the compressor seals.

Thanks again!
Jeff

---