ABS Amigo - How Can I Test My ABS Amigo V1

You can test the ABS Amigo V1 by simply starting the vehicle and plugging the ABS Amigo V1 into the OBDII port. The ABS Amigo V1  will cycle through the communications sequence and attempt to clear the EAS Fault. You can tell that the unit is working if you see the RED / Blue / Green LED patterns.

The ABS Amigo V1 has two disctinctly different LED patterns. The first pattern indicates the OBDII communications sequence. The second sequence is the USB communications sequence. It is important to notice the difference. Specifically, it is important to note if the ABS Amigo V1  displays the USB LED pattern when plugged into the Rover.






The information provided herewith is on "AS IS" basis without warranties of any kind either express or implied. RSW Solutions nor any affiliate guarantee the completeness, usefulness or accuracy of any information provided herewith either related to RSW Solutions LLC or any of the links that are referenced from this Web site. However, the information provided herewith is purely intended for your reference and information and does not express, nor intend to provide any opinion or advice or endorsement of any kind to the services provided by the organizations referenced in this Web site. Your use of this Web site (www.RSWsolutions.com) is at YOUR RISK. IN NO EVENT SHALL RSW Solutions LLC, OR ITS affiliates BE LIABLE FOR ANY LOSS OR INJURY OR DAMAGES, either direct, indirect, punitive, incidental, special incidental, or otherwise, resulting from or connected to the use of the www.RSWsolutions.com web site. YOU HEREBY WAIVE ANY AND ALL CLAIMS AGAINST RSW Solutions ARISING OUT OF YOUR USE OF THE SITE OR ANY OTHER INFORMATION PROVIDED ON THIS SITE (www.RSWsolutions.com).

Disclaimer: Land Rover, Range Rover and Rover are registered trademarks of Land Rover North America, Inc.. This website has no affiliation with Land Rover North America, Inc.