Old EAS Unlock - When Am I Properly Synchronized?

After you are certain of the Comm port number, you are ready to Initialize. When you press the Initialize button, a series of values will be sent to the EAS. The EAS will then be power-cycled. After the unit is power-cycled, full communication will begin. When synchronized, the EAS will respond with a stream of "FF". You should see the Tx buffer sending out "FF" and "01". The Rx buffer will contain the "FF" responses. You want to see the "FF" response all by itself in the Rx buffer. When you are receiving just a stream of "FF" responses, you are ready to send and receive commands to and from the EAS.
Video: EASunlock Demonstration


The information provided herewith is on "AS IS" basis without warranties of any kind either express or implied. RSW Solutions nor any affiliate guarantee the completeness, usefulness or accuracy of any information provided herewith either related to RSW Solutions LLC or any of the links that are referenced from this Web site. However, the information provided herewith is purely intended for your reference and information and does not express, nor intend to provide any opinion or advice or endorsement of any kind to the services provided by the organizations referenced in this Web site. Your use of this Web site (www.RSWsolutions.com) is at YOUR RISK. IN NO EVENT SHALL RSW Solutions LLC, OR ITS affiliates BE LIABLE FOR ANY LOSS OR INJURY OR DAMAGES, either direct, indirect, punitive, incidental, special incidental, or otherwise, resulting from or connected to the use of the www.RSWsolutions.com web site. YOU HEREBY WAIVE ANY AND ALL CLAIMS AGAINST RSW Solutions ARISING OUT OF YOUR USE OF THE SITE OR ANY OTHER INFORMATION PROVIDED ON THIS SITE (www.RSWsolutions.com).

Disclaimer: Land Rover, Range Rover and Rover are registered trademarks of Land Rover North America, Inc.. This website has no affiliation with Land Rover North America, Inc.