To link a key with the L322 Range Rover Body Control Module (BCM) there are a few steps that need to be performed.
1. Enter the vehicle and make sure that all doors are shut and locked.
2. Insert the new key into the ignition switch.
3. Turn the key to position 1. Turn the key to position 0 and remove within 5 seconds.
4. Within 25 seconds perform the following steps
5. Press and hold the unlock button on the remote.
6. Press the lock button 3 times.
7. Press both unlock and lock together.

If the procedure was successful, the doors will lock and unlock.
Repeat steps 4-7 for additional keys.

The information provided herewith is on "AS IS" basis without warranties of any kind either express or implied. RSW Solutions nor any affiliate guarantee the completeness, usefulness or accuracy of any information provided herewith either related to RSW Solutions LLC or any of the links that are referenced from this Web site. However, the information provided herewith is purely intended for your reference and information and does not express, nor intend to provide any opinion or advice or endorsement of any kind to the services provided by the organizations referenced in this Web site. Your use of this Web site ( is at YOUR RISK. IN NO EVENT SHALL RSW Solutions LLC, OR ITS affiliates BE LIABLE FOR ANY LOSS OR INJURY OR DAMAGES, either direct, indirect, punitive, incidental, special incidental, or otherwise, resulting from or connected to the use of the web site. YOU HEREBY WAIVE ANY AND ALL CLAIMS AGAINST RSW Solutions ARISING OUT OF YOUR USE OF THE SITE OR ANY OTHER INFORMATION PROVIDED ON THIS SITE (

Disclaimer: Land Rover, Range Rover and Rover are registered trademarks of Land Rover North America, Inc.. This website has no affiliation with Land Rover North America, Inc.